14
OSD Menus
Image
1st Level Menu 2nd/3rd Level Menu Description
Brightness 0-100 ∙ Properly adjust Brightness according to the
surrounding lighting.
Contrast 0-100 ∙ Properly adjust Contrast to relax your eyes.
Sharpness 0-5
∙ Sharpness improves clarity and details of
images.
Color Temperature Cool ∙ Use Up or Down Button to select and preview
mode effects.
∙ Press the OK Button to confirm and apply your
mode type.
∙ Users can adjust Color Temperature in
Customization mode.
Normal
Warm
Customization R (0-100)
G (0-100)
B (0-100)
Screen Size Auto ∙ Users can adjust Screen Size in any mode, any
resolution and any screen refresh rate.
∙ Activating Screen Size 16:10 will affect:
Affected Function Function Status
» HDR Not supported
» HDMI™ 2.1 Unable to select
∙ Activating Screen Size 1:1 will affect:
Affected Function Function Status
» MPRT
» Adaptive-Sync
» PIP/PBP
» Optix Scope
Set to OFF
4:3
16:9
16:10
1:1
Input Source
1st Level Menu 2nd Level Menu Description
HDMI™ 1 ∙ Users can adjust Input Source in any mode.
HDMI™ 2
DP
Type C
Auto Scan OFF ∙ Users can use the Navi Key to select Input Source at
below status:
• While “Auto Scan” is set to “OFF” with the monitor at
power saving mode;
• While “No Signal” message box is shown on the
monitor.
ON
To Next Page
Loading...
