19
OSD Menus
1st Level Menu 2nd Level Menu Description
Power Button OFF ∙ When set to OFF, users can press the power
button to turn off the monitor.
Standby ∙ When set to Standby, users can press the
power button to turn off the panel and
backlight.
Info. On Screen OFF ∙ The information of the monitor status will be
shown on the right side of the screen.
ON
HDMI™ CEC OFF ∙ HDMI™ CEC (Consumer Electronics Control)
supports Sony PlayStation®, Nintendo®
Switch™, Xbox Series X|S consoles and various
audio-visual devices that are CEC-capable.
∙ If HDMI™ CEC is set to ON:
• The monitor will automatically power on
when the CEC device is turned on.
• The CEC device will enter power saving
mode when the monitor is turned off.
• When Sony PlayStation®, Nintendo®
Switch™, or Xbox Series X|S console is
connected, Game Mode and Pro Mode will be
automatically set to default modes and can
be adjusted to users’ preferred modes later.
ON
Type C PD Charge OFF ∙ This function enables users to charge their
devices through a USB Type-C connector.
ON
Reset YES ∙ Users can Reset and restore settings to
original OSD Default in any mode.
NO
MSI OLED Care
1st Level Menu 2nd/3rd Level Menu Description
Pixel Shift Slow ∙ Pixel Shift moves the pixels of your screen at
regular intervals to reduce the possibility of
screen burn-in or image retention.
Normal
Fast
Panel Protect ∙ To maintain panel image quality, panel protect
(short time) function will automatically activate
when monitor using over 4 hours.
∙ This protect function may take several minutes
to complete.
∙ The power indicator will blink orange color until
process done.
∙ During process executing, please do not unplug
the power cord from monitor.
∙ During process executing, press power button
again to cancel this function.
To Next Page
Loading...
Need help?
General
