To Next Page

To Previous Page

Getting Started

Installing the Monitor Stand

1. Leave the monitor in its protective packaging. Align the stand to the monitor

groove.

2. Push the stand towards the monitor groove until it locks in place.

3. Connect the base to the stand and tighten the base screws to secure the base.

4. Make sure the stand assembly is properly installed before setting the monitor

upright.

⚠

Important

∙

Place the monitor on a soft, protected surface to avoid scratching the display panel.

∙

Do not use any sharp objects on the panel.

∙

The groove for installing the stand bracket can also be used for wall mount. Please

contact your dealer for proper wall mount kit.

Questions and Answers:

Need help?

Do you have a question about the MSI MPG 321URX QD-OLED (3DD2) and is the answer not in the manual?

MSI MPG 321URX QD-OLED (3DD2) Specifications

General

Panel Type	QD-OLED
Aspect Ratio	16:9
Refresh Rate	240Hz
Response Time	0.03ms (GtG)
Color Gamut	99% DCI-P3
Adaptive Sync	AMD FreeSync Premium Pro, NVIDIA G-Sync Compatible
Curvature	Flat
VESA Mount	100 x 100 mm
Screen Size	32 inches
Resolution	3840 x 2160 (UHD)
Brightness	1000 nits (peak)
Ports	2x HDMI 2.1, 1x DisplayPort 1.4, 2x USB