MSI MPG ARTYMIS 273CQR - Display Feature Settings; MPRT Settings

14
OSD Menus
1st Level Menu 2nd/3rd Level Menu Description
MPRT OFF ∙ When MPRT is enabled, Brightness
cannot be enabled and will be grayed
out.
∙ Response time will be grayed out
while MPRT is enabled.
∙ MPRT is available when the refresh
rate is over 85Hz.
ON
Refresh Rate Location Left Top ∙ Location is adjustable in OSD
Menu. Press the Middle Button to
confirm and apply your Refresh Rate
Location.
∙ This monitor follows and works at the
Operating System’s preset Screen
Refresh Rate.
Right Top
Left
Bottom
Right
Bottom
Customize
OFF
ON
Alarm Clock Location Left Top ∙ After setting the time, press the
Middle Button to activate the timer.
∙ Users have to manually restore their
preset Alarm Clock after any AC
power loss and reconnection.
Right Top
Left
Bottom
Right
Bottom
Customize
OFF
15:00 00:01 ~
99:59
30:00
45:00
60:00
KVM
(MAG ARTYMIS
274CP)
Auto ∙ Auto allows the monitor to
automatically switch between USB
input sources, such as keyboards,
mice or other USB devices.
∙ Users can also designate Upstream
port or USB Type-C as the only USB
signal source.
Upstream
Type-C