MSI MPG Z790 EDGE MONSTER HUNTER EDITION - Page 36

36
1. Loosen the screws that secure the plate on top of the M.2 Shield Frozr heatsink.
2. Lift up the plate and remove it.
11
11
22
3. Loosen the screws of M.2 Shield Frozr heatsink.
4. Lift up the M.2 Shield Frozr heatsink and remove it.
33
33
44
5. If you want to install 2260 M.2 SSD, please install the supplied EZ M.2 Clip kit in the
2260 screw hole. Skip this step, if you install 2280 SSD.
55
2260
Installing M.2 module into M2_2 & M2_5 slots
⚠
Important
If your motherboard is MPG Z790 EDGE TI MAX WIFI, please skip steps 1~2 and step 10
below.