MSI MPG Z790 EDGE MONSTER HUNTER EDITION - Onboard LEDs and Controls; EZ Debug LED Indicators; EZ LED Control Switch

54
EZ Debug LED
These LEDs indicate the debug status of the motherboard.
Onboard LEDs
LED_SW1: EZ LED Control
This switch is used to switch on/ off all the LEDs of motherboard.
LED_SW1
LED_OFF
LED_ON
(Default)
CPU - indicates CPU is not detected or fail.
DRAM - indicates DRAM is not detected or fail.
VGA - indicates GPU is not detected or fail.
BOOT - indicates the booting device is not detected or fail.