MSI MS-6119 ATX BX2 - Modem Wake Up Connector: JMDM1; Wake-Up on LAN connector: JWOL1; Add-On Card Sound Connector: J3

MS-6119 ATX BX2 Mainboard
MICRO-STAR INTERNATIONAL COMPANY LTD.
Specification & User’s Guide
Modem Wake Up Connector: JMDM1
The JMDM1 connector is for used with Modem add-on card that supports the Modem Wake Up function.
NC GND
MDM_WAKEUP
NC 5VSB
Wake-Up on LAN connector: JWOL1
The JWOL1 connector is for use with LAN add-on cards that supports Wake Up on LAN function.
JWOL1
JMDM1
5VSB
GND
MP_WAKEUP
Note: Modem wake-up signal is active “low”.
Note: LAN wake-up signal is active “high”.
Add-On Card Sound Connector: J3
The mainboard provides a distributed DMA connector for PCI sound card with this feature, such as Creative
®
PCI 3D sound card.
DMA Grand Signal
GND
DMA Request Signal
Seried IRQ
1
3
4
6
J3