CHAPTER 2 HARDWARE INSTALLATION
2-21
2.17 USB Front Connector Enabled/Disabled
Jumper: J17 (optional)
This jumper is used to Enabled or Disabled the USB Front Connector. If the
USB Front connector is set to enabled, the top USB port at the rear I/O
panel will be disabled. If the USB Front connector is set to disabled, the
USB ports at rear I/O panel will both be operational.
Enabled
Disabled
1
3
4
6
1
3
4
6
J17
1
3
4
6
To Next Page
Loading...
