CHAPTER 4
VGA DRIVER
4-4
2.2 Windows
®
NT 4.0
You need to install Windows
®
NT “Service Pack 3” or higher,
before you install Windows
®
NT driver.
2.2-1 Display Driver Installation Procedure:
Step 1: Click Start menu and select Control Panel from Settings
group.
Step 2: Select Display icon.
Step 3: Select Settings on the Display Properties.
Step 4: Select Display Type.
Step 5: Select Change from the Adapter Type Area.
Step 6: Select Have Disk of Change Display.
Step 7: Insert the CD-Title Disk into CD-ROM Drive.
Step 8: When the Install from Disk dialog box appears, look for your
CD-ROM drive :\SVGA\Intel\810\NT4\WINNT4
Step 9: When the Change Display dialog box appears, click OK.
Step 10: When the Third-party Drivers dialog box appears, click Yes.
A message will appear stating that the drivers were succesfully
installed. Click OK. You must now restart Windows
®
NT 4.0.
Note: You can also use CD autorun to install the VGA NT driver.
To Next Page
Loading...
