CHAPTER 4
VIA CHIPSET DRIVER
4-2
Driver Setup & Usage Procedures for
Windows
®
98
Insert the CD-title into your CD-ROM drive. The CD will auto-run
and will display the four icons in the monitor “VIA Chipset Drivers”,
“VIA AC97 PCI Sound Drivers” and “Download VIA Drivers”. In
order to install the drivers correctly, you must install the “Via Chipset
Drivers” first, and then install the “VIA AC97 PCI Sound Drivers”.
VIA Chipset Drivers installation procedure:
Step 1: Insert the provided CD_ROM disk into the CD-ROM drive.
Step 2: Look for the CD_ROM drive, double click on the CD_ROM
icon. This will show the setup screen.
Step 3: Click on “Via Chipset Drivers” icon and the screen will show
“VIA Service Pack”.
Step 4: Click “Next” and the screen will show four drivers “VIA
Atapi Vendor Support Driver”, “AGP VxD Driver”, “VIA
Chipset Function’s Registry” and “IRQ Routing Miniport
Driver”. Select all four drivers and click on “Next”.
Step 5: The setup program will request you to choose “Install VIA
Atapi Vendor Support Driver”. Please select “Install” and
click “Next” to continue.
Step 6: Click to enabled DMA Mode, Please select “Install” and
click “Next” to continue.
Step 7: The setup program will request you to choose “Install VIA
AGP VxD in turbo mode”, “Install VIA AGP VxD in normal
mode” or “Uninstall VIA AGP VxD”. Please select “Install
VIA AGP VxD in turbo mode” and click on “Next”.
To Next Page
Loading...
