2-21
Hardware Setup
S-Bracket Connector: JSP1
The connector allows you to connect a S-Bracket for Sony & Philips
Digital Interface (SPDIF). The S-Bracket offers a SPDIF jack for digital audio
transmission (for coaxial connection).
The SPDIF jack supports SPDIF output only. For more information on
the S-Bracket, refer to Appendix. Using 4- or 6-Channel Audio Function.
JSP1
1
11
2
12
PIN SIGNAL DESCRIPTION PIN SIGNAL DESCRIPTION
1 VCC5 VCC 5V 2 VDD3 VDD 3.3V
3 SPDFO S/PDIF output 4 (No Pin) Key
5 GND Ground 6 SPDFI S/PDIF input
7 LFE-OUT Audio bass output 8 SOUT-R Audio right surrounding output
9 CET-OUT Audio center output 10 SOUT-L Audio left surrounding output
11 GND Ground 12 GND Ground
Pin Definition
S-Bracket
SPDIF jack (coaxial)
To Next Page
Loading...
