2-23
Hardware Setup
+
Bluetooth Connector: JBT1 (Optional)
This connector is used to connect a bluetooth module for wireless
connection.
MSI Reminds You...
Because the bluetooth connector shares the USB interface with
blue-colored USB2.0 connector, one of the USB2.0 port (see
instruction on the cable) will not function when you attach a
bluetooth module to this connector.
PIN SIGNAL PIN SIGNAL
1 5VDUAL 2 3VDUAL
3 D+ (USB signal) 4 GND
5 D- (USB signal) 6 GND
7 GND 8 NC
JBT1 Pin Definition
Do not remove,
when using bluetooth
JBT1
7
12
To Next Page
Loading...
