3-26
MS-7226 Mainboard
SoftWare Memory hole
When the MCT Timing Mode is set to [Manual], the field is adjustable. Enable
Memory Remapping Around Memory Hole.
C51/ MCP55 PCI-Express Frequency
These items allow you to select the C51/MCP55 PCI Express frequency and overclock
the processor by adjusting the PCI Express frequency to a higher frequency.
Advance Voltage Control
Press <Enter> to enter the sub-menu and the following screen appears.
CPU to NB HT Voltage
Adjust the HT voltage betweent CPU and NB.
SB to PCIE VGA Voltage
Adjust the voltage betweent SB and PCIE slot.
NB to SB HT Voltage
Adjust the HT voltage betweent NB and SB.
NB to PCIE VGA Voltage
Adjust the voltage betweent NB and PCIE slot.
The settings shown in different color in Adjusting Voltage items help to
verify if your setting is proper for your system.
Gray: Default setting.
Yellow:High performance setting.
Red: Not recommended setting and the system may be unstable.
Changing any Voltage item may result in the instability of the system;
therefore, it is NOT recommended to change the default setting for long-term
usage.
Important
To Next Page
Loading...
