MS-7226 Mainboard
A-2
Activating DigiCell
Once you have your DigiCell installed (locate the setup source file in the setup CD
accompanying with your mainboard, path: Utility --> MSI Utility --> MSI DigiCell), it
will have an icon in the system tray, a short cut icon on the desktop, and a short
cut path in your “Start-up” menu. You may double-click on each icon to enable DigiCell.
short-cut icon in the system tray
short-cut path in the start-up menu
(path: Start-->Programs-->MSI-->DigiCell)
To Next Page
Loading...
