MS-7551 Mainboard
3-10
Onboard VGA Over Clock
This item is used to enable/ disable the onboard VGA overclock.
Onboard VGA Clock
When Onboard VGA Over Clock is set to [Enabled], users can select the
onboard VGA clock for overclocking.
Boot Sequence
Press <Enter> to enter the sub-menu and the following screen appears:
1st/ 2nd Boot Device
The items allow you to set the first/ second boot device where BIOS attempts to
load the disk operating system.
Boot From Other Device
Setting the option to [Yes] allows the system to try to boot from other device. If
the system fails to boot from the 1st/ 2nd/ 3rd boot device.
Trusted Computing
Press <Enter> to enter the sub-menu and the following screen appears:
TCG/TPM SUPPORT
Setting the option to [Yes] enables TPM (Trusted Platform Module) to the system.
Execute TPM Command
Setting the option to [Enable] allows the system to execute TPM Command.
Clearing the TPM
Press Enter to clear the TPM status.
TPM Enable/Disable status, TPM Owner Status
These items show the status of TPM (read only).
To Next Page
Loading...
