MSI MS-772 v6.X - Page 17

English
7
5. Locate the CPU fan connector on the motherboard.
6. Position the cooling set onto the retention mechanism. Hook one end of the clip
to hook 󰘰rst.
7. Then press down the other end of the clip to fasten the cooling set on the top of
the retention mechanism. Locate the Fix Lever and lift up it.
. Fasten down the lever.
9. Attach the APU Fan cable to the APU fan connector on the motherboard.
Important
While disconnecting the Safety Hook from the 󰘰xed bolt, it is necessary to keep an
eye on your 󰘰ngers, because once the Safety Hook is disconnected from the 󰘰xed
bolt, the 󰘰xed lever will spring back instantly.
Con󰘰rm that the APU cooler has formed a tight seal with the APU before booting
your system.
Please refer to the documentation in the APU cooler package for more details
about APU cooler installation.
•
•
•