To Next PageTo Next Page
Need help?Do you have a question about the MSI MS-7641 and is the answer not in the manual?
General| Model | MS-7641 |
|---|---|
| Form Factor | Micro ATX |
| Socket | AM3 |
| Maximum Memory | 16 GB |
| Storage Interface | 4 x SATA 3Gb/s |
| Expansion Slots | 1 x PCIe x1, 1 x PCI |
| USB Ports | 8 x USB 2.0 |
| Audio | Realtek ALC887 |
| LAN | Realtek RTL8111E Gigabit LAN Controller |
| Memory Slots | 2 x DIMM |
Steps to resolve radio frequency interference issues.
Specifies use of shielded cables and power cords for compliance with emission limits.
Important cautions for safe operation, handling, and environmental considerations.
Visual guide to motherboard components, connectors, and their arrangement.
Information on Processor, Chipset, Memory, LAN, and Audio specifications.
Details on SATA, RAID, and rear/onboard connectors.
Information regarding PCIE/PCI slots, motherboard dimensions, and mounting holes.
Step-by-step guide for installing the CPU and its cooling solution.
Instructions for properly inserting memory modules into DIMM slots for correct orientation.
Details for connecting ATX 24-pin and 4-pin power supplies to the mainboard.
Information on Serial ATA interface ports and proper cable handling.
Explains fan power connectors and front panel audio connector pinouts.
Details for connecting front panel switches and LEDs to the motherboard headers.
Information on serial port (COM) and front USB connector pinouts.
Details for TPM module and chassis intrusion switch connections.
Jumper settings to select between DVI-D and HDMI output ports.
Procedure for clearing CMOS settings using the JBAT1 jumper for system configuration reset.
Jumper settings to control USB port power delivery in standby mode.
Information on PCIE x16, PCIE x1, and PCI slot types and compatibility.
Explanation of the IRQ routing for PCI slots and their connections.
Instructions on how to enter the BIOS setup utility from the boot screen.
Description of the main BIOS setup screen, navigation keys, and options.
Explains various BIOS configuration menus like Cell Menu, M-Flash, and Power Management.
Procedures for loading fail-safe and optimized default BIOS values for system stability.
Details on configuring CPU frequency, voltage, and related features like Cool'n'Quiet.
Options to control CPU cores, unlock cores, and enable C1E support for power saving.
Settings for DRAM timing modes, drive strength, and advanced control options.
Explanation of power-saving technologies for memory operation.
Adjusting FSB/DRAM ratio, HT link speed, and PCI-E frequency for performance.
How to use Spread Spectrum for EMI reduction and its impact on system stability.
Steps to load default BIOS values provided by the manufacturer for stable performance.
