Need help?Do you have a question about the MSI MS-7602 and is the answer not in the manual?
General| Brand | MSI |
|---|---|
| Model | MS-7602 |
| Category | Motherboard |
| Language | English |
Guidelines for handling and operating the mainboard safely to prevent damage or injury.
Warning about potential battery explosion if replaced incorrectly.
Step-by-step guide for installing the audio driver from the provided DVD.
Guidelines for installing the CPU and preventing overheating.
Information and warnings regarding CPU overclocking.
Steps for preparing the CPU socket and removing protective caps.
Instructions for opening and closing the CPU socket's load lever.
Steps for aligning and securing the CPU cooler heatsink onto the mainboard.
Key reminders for CPU installation, cooler confirmation, and socket protection.
Details DDR2 memory specifications and rules for Dual-Channel configuration.
Critical guidelines for installing DDR2 memory modules correctly.
Step-by-step guide for inserting memory modules into DIMM slots.
How to verify if memory modules are properly seated and locked.
Information on connecting the 24-pin and 4-pin ATX power supplies.
Guidelines for selecting an adequate power supply unit for system stability.
How to use the JBAT1 jumper to clear CMOS settings for system configuration.
Situations requiring the user to enter the BIOS setup utility.
Instructions on how to enter the BIOS setup utility using the DEL key.
Settings for BIOS flash protection and logo display.
Settings for MPS Table, Primary Graphics Adapter, and PCI Latency Timer.
Configuration for CPU features and chipset functionalities.
Settings for DVMT mode and memory allocation for video.
Defines boot device order and Trusted Platform Module settings.
Enable/disable onboard USB, LAN, and HD Audio controllers.
Settings for PCI IDE BusMaster and SATA controllers.
Activates ACPI and sets power saving modes.
Configures the power button behavior and front panel LED.
Sets system behavior after power failure.
Configures system wake-up events from sleep states.
Enables chassis intrusion detection and manages CPU fan speed.
Controls system fan speed and displays system health metrics.
How to set, confirm, and clear the BIOS password for security.
Displays current CPU, DRAM, and QPI clock speeds.
Shows detailed information about the installed CPU.
Sets the CPU Front Side Bus frequency and adjusts the CPU ratio.
Advanced settings for DRAM timing control.
Detailed explanation of DRAM timing parameters like CL, tRCD, tRP.
Adjusts the ratio between FSB and DRAM, and PCI-E frequency.
Adjusts CPU and DRAM voltages for overclocking.
Methods to recover the system from failed overclocking attempts.
To Next Page
