Need help?Do you have a question about the MSI MS-7357 and is the answer not in the manual?
General| Brand | MSI |
|---|---|
| Model | MS-7357 |
| Category | Motherboard |
| Language | English |
Legal statement of intellectual property ownership for the document.
List of registered trademarks and their respective owners.
Details the version and release date of the manual.
Information on how to obtain assistance and find support resources.
Essential guidelines for safe equipment operation, handling, and environment.
Cautionary note regarding the danger of explosion from incorrect battery replacement.
Guidance on responsible disposal of waste batteries for environmental protection.
Statement on compliance with FCC rules for digital devices and potential interference.
Recommended user actions to correct radio frequency interference issues.
Notices regarding modifications and use of shielded cables for compliance.
Information on the EU Waste Electrical and Electronic Equipment directive and product return.
Details supported Intel processors and Front Side Bus speeds.
Identifies the North and South bridge chipsets used on the motherboard.
Specifications for DDR2 memory capacity and Fast Ethernet LAN.
Details on IEEE 1394, Audio, IDE, and SATA interfaces.
Details on floppy support, RAID technology, and back panel/on-board connectors.
Describes PCI Express, PCI slots, and the Micro-ATX form factor.
Diagram showing back panel ports with corresponding page references.
Diagram identifying internal motherboard headers and connectors.
Diagram indicating positions of expansion slots and power connectors.
Information on the CPU socket type and compatible processors.
Warnings and procedures for CPU overheating and safe replacement.
Advice and warnings regarding CPU overclocking and potential risks.
Steps for preparing the socket and installing the CPU correctly.
Procedure for mounting the CPU cooler securely onto the motherboard.
Confirmation steps and important reminders for CPU/cooler installation.
Details on DDR2 and DDR3 memory types, pin configurations, and voltage.
Important notes on memory compatibility and dual-channel operation rules.
Guidance on aligning memory module notches and inserting them correctly.
How to verify that memory modules are fully seated in the DIMM slots.
Description of CPU and system fan power connectors and Smart FAN function.
Details on the floppy disk drive connector and the IDE connector.
Information on Serial ATA connectors and the IEEE1394 connector.
Details on connectors for front panel switches, LEDs, and speaker.
Information on front USB 2.0 and S/PDIF audio connectors.
Details on the Azalia-compliant front panel audio header.
Details on the AC97-compliant front panel audio header.
Information on the CD-In audio input and Chassis Intrusion connectors.
Descriptions of infrared module, serial port, and TV-out connectors.
Description of the diagnostic D-Bracket connector for system status LEDs.
Explanation of D-Bracket diagnostic LED codes for system troubleshooting.
Procedure for clearing CMOS settings to reset system configuration.
Information on connecting the ATX 24-pin power supply.
Details on ATX 20-pin and various 12V power connectors for CPU and graphics.
Description of the NV SLI connector for configuring SLI modes.
Details on PCI Express x16, x4, and x1 slots and their transfer rates.
Description of standard PCI slots and the Accelerated Graphics Port (AGP) slot.
Safety precautions for installing or removing expansion cards.
Description of PS/2 ports for mouse/keyboard and the parallel printer port.
Description of the serial communication port and the VGA video output port.
Description of DVI video output, IEEE1394, and RJ-45 LAN ports.
Description of Universal Serial Bus ports and audio jacks.
Description of the eSATA port for connecting external SATA devices.
When to enter BIOS setup and the format of the BIOS version string.
Instructions on accessing and moving through BIOS setup menus.
How to access and utilize the BIOS help screen for assistance.
Overview of the main BIOS setup categories for system configuration.
Descriptions for CMOS, Advanced BIOS, Peripherals, Power, PNP/PCI, H/W Monitor, Freq/Voltage.
Options for loading default settings and setting a BIOS password.
Procedures for saving configuration changes and exiting the BIOS setup.
Steps to load system optimized default settings for optimal performance.
Instructions for adjusting the system's date and time via the BIOS.
Procedure for saving configuration settings and exiting the BIOS utility.
Overview of software and drivers included on the mainboard package CD.
Explanation of the Driver, Utility, and Website menus on the CD.
Advice on visiting the MSI website for the latest drivers and BIOS updates.
To Next Page
