To Next Page

To Previous Page

Preface

viv

Safety Instructions

◙ Read the safety instructions carefully and thoroughly�

◙ All cautions and warnings on the device or user’s manual should be noted�

◙ Refer servicing to quali󰘰ed personnel only.

Keep the User’s Guide that comes with the package for future reference�

To prevent 󰘰re or shock hazard, keep this device away from humidity and high

temperature�

Lay this device on a reliable 󰘱at surface before setting it up.

◙ Make sure that the power voltage is within its safety range and has been

adjusted properly to the value of 100~240V before connecting the device to

the power outlet� Do not disable the protective earth pin from the plug� The

device must be connected to an earthed mains socket-outlet�

◙ Always disconnect the power cord or switch the wall socket o󰘯 if the device

would be left unused for a certain time to achieve zero energy consumption.

The ventilator on the device is used for air convection and to prevent the device

from overheating� Do not cover the ventilator�

Do not leave the device in an unconditioned environment with a storage

temperature above 60

C or below -20

C, which may damage the device�

NOTE: The maximum operating temperature is around 40

C�

When cleaning the device, be sure to remove the power plug� Use a piece of soft

cloth rather than industrial chemical to clean the device� Never pour any liquid

into the opening; that could damage the device or cause electric shock�

Questions and Answers:

Need help?

Do you have a question about the MSI Optix MAG271R and is the answer not in the manual?

MSI Optix MAG271R Specifications

General