Getting Started
1-31-2
Installing the Monitor Stand
Optix MAG273 (3CB6)
IMPORTANT
Place the monitor on a soft, protected surface to avoid scratching the display panel�
The holes for installing the stand can be also used for wall mount� Please contact your
dealer for proper wall mount kit�
1� Fit the stand to the monitor�
2� Push down the latch to lock the stand in place�
3� Connect the base to the stand and tighten the base screw to secure the base�
4� Place the cover properly and tighten the screws to secure the cover�
3
2
1
4
To Next Page
Loading...
