MSI Optix MPG27CQ2 User Manual

2-7
OSD Setup
2-6
1st Level Menu 2nd/3rd Level Menu Description
Anti Motion Blur
(OFF)
󰀲 Brightness cannot be adjusted when Anti Motion
Blur is set to ON�
󰀲 When Response Time is set to Fastest with at least

automatically enabled�
󰀲 When Screen Refresh Rate is lower than 75HZ,
Anti Motion Blur cannot be enabled and Response
Time cannot be set to Fastest�
󰀲 When Anti Motion Blur is enabled, HDCR cannot
be enabled and will be grayed out�
󰀲 This function is recommended for cinema, FPS and
Racing games�
󰀲 When FreeSync is enabled, Anti Motion Blur will be
grayed out�
(ON)
Zero Latency
(OFF)
󰀲 Zero Latency default is ON�
󰀲 Zero Latency helps to reduce the signal throughput
timing and supports QHD only�
(ON)
Refresh Rate Location Left Top 󰀲 Users can adjust Refresh Rate in any Mode�
󰀲 Default Refresh Rate Location is Left Top� Location
is adjustable in OSD Menu� Press the Middle
󰘰
Location�
󰀲 This monitor follows and works at the Operating
System’s preset Screen Refresh Rate�
Right Top
Left Bottom
Right Bottom
OFF
ON
Alarm Clock Location Left Top
󰀲 Users can adjust Alarm Clock in any Mode�
󰀲 After setting the time, press the Middle Button to
activate the timer�
󰀲 Default Alarm Clock Location is Left Top� Users
can select their own location�
Right Top
Left Bottom
Right Bottom
OFF
15:00 00:01~99:59
30:00
45:00
60:00
Screen
Assistance
None
󰀲 Users can adjust Screen Assistance in any Mode�
󰀲 Screen Assistance default is None�
FreeSync
(OFF)
󰀲 FreeSync prevents screen tearing�
󰀲 HDMI default is ON but grayed out (cannot be
changed)�
󰀲 DisplayPort default is ON and can be adjusted ON/
OFF in any mode, any resolution, any input source
and any screen refresh rate�
󰀲 When FreeSync is enabled, Anti Motion Blur will be
grayed out�
(ON)

MSI Optix MPG27CQ2 Specifications

General

3D	No
Panel type	VA
Pixel pitch	0.2331 x 0.2331 mm
Display surface	Matt
Display diagonal	27 \
Screen curvature	1800 mm
Display technology	LED
Native aspect ratio	16:9
Horizontal scan range	70.56 - 214.56 kHz
Screen curvature rating	1800R
Viewable size, vertical	335.664 mm
sRGB coverage (typical)	115 %
Contrast ratio (dynamic)	100000000:1
Contrast ratio (typical)	3000:1
Display number of colors	16.78 million colors
Viewable size, horizontal	596.736 mm
Digital vertical frequency	48 - 144 Hz
Display brightness (typical)	400 cd/m²
Supported graphics resolutions	2560 x 1440
On/off switch	Yes
NVIDIA G-SYNC	-
Product color	Black
Market positioning	Gaming
USB hub version	3.2 Gen 1 (3.1 Gen 1)
DisplayPort version	1.2
USB upstream port type	USB Type-B
Number of upstream ports	1
VGA (D-Sub) ports quantity	0
USB Type-A downstream ports quantity	2
Tilt angle range	-5 - 20 °
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
Input current	4.5 A
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	- W
Power consumption (typical)	90 W
Package weight	10600 g

Weight and Dimensions

Depth (with stand)	379.3 mm
Width (with stand)	612 mm
Height (with stand)	555.8 mm
Weight (with stand)	7600 g