Getting Started
1-31-2
Installing the Monitor Stand
1� Align the latches of the stand to the monitor� Tighten the stand with the stand
screws�
2� Adjust the angle of the stand� Align the latches to place the VESA cover�
3� Connect the base to the stand and tighten the base screw to secure the base�
IMPORTANT
Place the monitor on a soft, protected surface to avoid scratching the display panel�
3
2
1
IMPORTANT
The holes for installing the stand can be also used for wall mount� Please contact your
dealer for proper wall mount kit�
To Next Page
Loading...
