10
Off No link
Yellow Linked
Blinking Data activity
Off 10 Mbps connection
Green 100/ 1000 Mbps connection
Orange 2.5 Gbps connection
To configure 7.1-channel audio, you have to connect front audio I/O module to JAUD1
connector and follow the below steps.
Click on the Realtek HD Audio Manager > Advanced Settings to open the dialog
below.
Select Mute the rear output device, when a front headphone plugged in.
Plug your speakers to audio jacks on rear and front I/O panel. When you plug into
a device at an audio jack, a dialogue window will pop up asking you which device
is current connected.
USB 3.2 Gen 1
5Gbps Type-A
PS/2 Combo port
2.5 Gbps LAN
USB 2.0 Type-A
Line-in
Mic-in
Line-out
USB 3.2 Gen 2
10Gbps Type-A
USB 3.2 Gen 2
10Gbps Type-C
Wi-Fi Antenna
connectors
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
