5
Getting Started
1
Power Button
Press the power button to turn the system on and off.
2
Hard Disk Drive LED
This indicator shows the activity status of the HDD. It flashes when the
system is accessing data on the HDD and remains off when no disk activity
is detected.
3
USB 3.2 Gen 1x1 Port
This connector is provided for USB peripheral devices. (Speed up to 5 Gbps)
4
USB 3.2 Gen 2x1 Port (Type-C)
This connector is provided for USB peripheral devices. (Speed up to 10
Gbps)
5
Combo Audio Jack
This connector is provided for headphones or speakers or microphones.
6
Power Button Switch Cable Connector
With a power button switch cable, you can power on/ off the device easier.
Remove the cover from the connector and connect the power button switch
cable to this connector.
7
HDMI™ Connector
The High-Definition Multimedia Interface (HDMI™) is an all-digital audio/
video interface capable of transmitting uncompressed streams. HDMI™
supports all TV format, including standard, enhanced, or high-definition
video, plus multi-channel digital audio on a single cable.
8
DisplayPort 1.4 Port
Supports a maximum resolution of 4K 60Hz.
⚠
Important
∙
Graphics specifications may vary depending on the installed CPU.
∙
For processors without integrated graphics, connect your monitor to the
discrete graphics card.
To Next Page
Loading...
Need help?
General