MSI PRO MP223 - Input Source OSD Menu

14
OSD Menus
1st Level Menu 2nd/3rd Level Menu Description
Color
Temperature
Cool ∙ Use Up or Down Button to select and
preview mode effects.
∙ Press the E Button to confirm and
apply your mode type.
Normal
Warm
Customization R (0-100)
G (0-100)
B (0-100)
Clock
(For D-Sub)
0-100 ∙ Adjusting the clock to reduce
Vertical-Line noise
Phase
(For D-Sub)
0-100 ∙ Adjusting the phase to reduce
Horizontal-Line noise
H. Position
(For D-Sub)
0-100 ∙ Adjusting the horizontal position of
the image
V. Position
(For D-Sub)
0-100 ∙ Adjusting the vertical position of the
image
Input Source
1st Level Menu 2nd Level Menu Description
HDMI™ ∙ Users can adjust Input Source in any mode.
D-Sub
Auto Scan OFF ∙ Users can use the Navi Key to select Input
Source at below status:
• While “Auto Scan” is set to “OFF” with the
monitor at power saving mode;
• While “No Signal” message box is shown
on the monitor.
ON