4
Installing the Monitor Stand
1. Leave the monitor in its protective packaging. Align and gently push the stand
bracket towards the monitor groove until it locks in place.
2. Align and gently push the base towards the stand until it locks in place.
3. Make sure the stand assembly is properly installed before setting the monitor
upright.
1
2
⚠
Important
∙
Do not use any sharp objects on the panel.
∙
Place the monitor on a soft, protected surface to avoid scratching the display panel.
By model 確認
∙
Remove the screws on the monitor groove if needed before installing the stand.
∙
若顯示器凹槽上鎖有螺絲，請在組裝立架之前取下。
∙
The reserved pivot 5° is designed for adjusting the level imbalance of some tables.
∙
特別設計的 5° 樞軸旋轉用於微調某些水平失衡的桌面。
To Next Page
Loading...
