EasyManuals Logo

MSI PRO MP341CQ User Manual

MSI PRO MP341CQ
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
Getting Started
Installing the Monitor Stand
1. Leave the monitor in its protective foam packaging. Align the stand bracket to the
monitor groove.
2. Tighten the stand bracket with screws.
3. Connect the base to the stand and tighten the base screw to secure the base.
4. Align and push the stand cover towards the monitor groove until it locks in place.
5. Make sure the stand assembly is properly installed before setting the monitor
upright.
11
22
33
44
Important
Remove the screws on the monitor groove if needed before installing the stand.
Place the monitor on a soft, protected surface to avoid scratching the display panel.
Do not use any sharp objects on the panel.
This product comes with NO protective film to be removed by the user! Any
mechanical damages to the product including removal of the polarizing film may
affect the warranty!

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MSI PRO MP341CQ and is the answer not in the manual?

MSI PRO MP341CQ Specifications

General IconGeneral
Panel typeVA
Color depth10 bit
Pixel pitch0.23175 x 0.23175 mm
Display diagonal34 \
Anti-glare screenYes
Display technology-
Native aspect ratio21:9
Vertical scan range48 - 100 Hz
Screen curvature rating1500R
Viewable size, vertical333.72 mm
sRGB coverage (typical)116.25 %
Contrast ratio (dynamic)100000000:1
Contrast ratio (typical)3000:1
Display number of colors1.07 billion colors
Display diagonal (metric)86.36 cm
Viewable size, horizontal797.22 mm
Display brightness (typical)300 cd/m²
Supported graphics resolutions3440 x 1440
AMD FreeSync typeFreeSync
RMS rated power4 W
Number of speakers2
Product colorBlack
Market positioningBusiness
DisplayPort version1.2a
VGA (D-Sub) ports quantity0
Tilt angle range-3.5 - 21.5 °
Cable lock slot typeKensington
Panel mounting interface100 x 100 mm
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Energy efficiency scaleA to G
Power consumption (off)0.3 W
Power consumption (standby)0.5 W
Power consumption (typical)- W
Package typeBox
Package depth998 mm
Package width202 mm
Package height515 mm
Package weight10300 g
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)237 mm
Width (with stand)809.3 mm
Height (with stand)469.5 mm
Weight (with stand)7700 g
Depth (without stand)106.8 mm
Height (without stand)365.8 mm
Weight (without stand)6500 g

Related product manuals