E-12
MS-7151 ATX Mainboard
Installing AMD Athlon64 CPU Cooler Set
When you are installing the CPU, make sure the CPU has a heat sink
and a cooling fan attached on the top to prevent overheating. If you do not
have the heat sink and cooling fan, contact your dealer to purchase and install
them before turning on the computer.
MSI Reminds You...
Mainboard photos shown in this section are for demonstration of the
cooler installation for Socket 939 CPUs only. The appearance of
your mainboard may vary depending on the model you purchase.
2.Locate the Fix Lever, Safety Hook
and the Fixed Bolt.
Lift up the intensive fixed lever.
1.Position the cooling set onto the
retention mechanism.
Hook one end of the clip to hook
first, and then press down the
other end of the clip to fasten the
cooling set on the top of the
retention mechanism.
3.Fasten down the lever.
4.Make sure the safety hook com-
pletely clasps the fixed bolt of the
retention mechanism.
Safety Hook
Fixed Bolt
Fixed Lever
5.Attach the CPU Fan cable to the CPU
fan connector on the mainboard.
To Next Page
Loading...
