E-19
User’s Manual
PNP/PCI Configurations
This section describes configuring the PCI bus system and PnP (Plug & Play) feature.
PCI, or Peripheral Component Interconnect, is a system which allows I/O devices to
operate at speeds nearing the speed the CPU itself uses when communicating with
its special components. This section covers some very technical items and it is
strongly recommended that only experienced users should make any changes to the
default settings.
Primary Graphic’s Adapter
This setting specifies which VGA card is your primary graphics adapter. Setting
options are:
[Auto] The system initializes the graphic’s adapter automatically.
[PCI Mode]The system initializes the PCI Express graphic first. If a PCI Express
graphic card is not available, it will initialize the internal graphic’s
adapter.
To Next Page
Loading...
