EasyManua.ls Logo

MSI Summit E13 AI Evo - Page 18

MSI Summit E13 AI Evo
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-4 2-5
Introductions
1. Power Key/ Power LED/ Battery Reset
Power Key
Press this key to turn the notebook power ON.
While the notebook is turned on, quick press this key to
force the notebook into sleep state. Press again to wake up
the system from sleep state.
Long press this key to force a shutdown, if needed.
Power LED
Glowing white when the notebook power is turned on.
LED goes off when the notebook goes to the sleep state.
Battery Reset
Whenever the system firmware (EC) is upgraded or the system
hangs, please 1) remove the AC power; 2) long press this key
for 20 secs and then the LED goes to blink, and after 5 more
secs the LED would go off; 3) connect the AC power; 4) power
on the notebook.
2. Built-In Spatial Array Microphone
The built-in microphone can be used for spatial voice recording with noise reduction or
high quality audio recording.
3. Fingerprint Sensor (optional)
This notebook may be equipped with a fingerprint sensor, allowing users to set up
their own fingerprints to unlock the notebook.
4. Touchpad
This is the pointing device of the notebook.
5. Keyboard
The built-in keyboard provides all the functions of a notebook keyboard. Refer to How
to Use the Keyboard for details.
6. Status LED
Caps Lock
Glows when the Caps Lock function is activated.

Table of Contents

Related product manuals