3-3
Wind Box DC100
Creating System Recovery Disc
For the fi rst-time use, it is highly recommended that you create a system recovery
disc as the backup solution in the event of a catastrophic disk failure or other ac-
cidents. Before moving forward, please make sure your system booting setup is
complete and go over the following procedures to get it done.
1. Double-click the “BurnRecovery”
icon on the desktop to launch the
Recovery Disc Creation Tool. Please note that it may take a while for the
operating system to prepare recovery fi les.
2. Click [Next] to start the image creation of the recovery disc.
To Next Page
Loading...
