4-9
BIOS Setup
Boot menu
Quiet Boot
Set this item to Enabled shows OEM logo, while Disabled shows POST
message during POST process. Setting options: Disabled and Enabled.
The default setting is Enabled.
Bootup NumLock State
This setting is to set the Num Lock State when the system is powered on.
Setting to On will turn on the Num Lock key when the system is powered on.
Setting to Off will allow the users to use the arrow keys on the numeric
keypad.
Set Boot Priority
These items showing the sequence of boot devices where BIOS attempts
to load the disk operating system.
Select 1
st
/2
nd
/ 3
rd
/ 4
th
/ 5
th
/6
th
Boot Priority
The system is going to boot from other device if fails to boot from the 1
st
/2
nd
/3
rd
/4
th
/ 5
th
/6
th
boot device.
To Next Page
Loading...
