2-11
MS-9A55
Step 6:
Locate the signal cable of the monitor and connect one end of the cable to
the DVI port of the system. You may need to get an adapter if the supplied
signal cable isn’t DVI-interfaced.
Step 7:
Connect the other end of the signal cable to the monitor. Connect the moni-
tor power cord to the monitor and to the power source.
Step 8:
Assemble the system power adapter and the power cord. Connect the
power adapter to the system and then connect the power cord to the power
source.
Important
We suggest that you connect the power adapter to your system rst and
then connect the power cord to the socket-outlet for safety concerns.
Step 9:
Turn on the system and enjoy it.
To Next Page
Loading...
