MSI X340 - Remove Hinge Securing Screws; Remove Right Side I;O Board; Remove I;O Board Components

X340（MS-1352）Disassemble Guide
7、LOWER CASE ASSY-1
7.4：Remove the 3 screws(M2*3.5mm)
Attention: the screw driver torque is 1.5-2.0Kgf-cm
Component P/N Qty
Screw E43-1203501-H29 3
7.5：Remove the I/O board of right side as pic
shows:
Component P/N Qty
Right Side I/O Board 607-1352N-02S 1
7.6：Remove the LINK cable that connect with the
Right side I/O board, then remove the Audio cover
and DCIN cover on this board;
Component P/N Qty
LINK Cable K10-3024011-H39 1
Audio Cover E2P-3511411-D37 2
DCIN Cover E2P-3510911-D37 1