MSI X340 - Remove Heatsink Assembly; Remove Fan Securing Screws (Set 1); Remove Fan Securing Screws (Set 2)

X340（MS-1352）Disassemble Guide
9、LOWER CASE ASSY-2
9.7：Firstly remove the Mylar pasted on heatsink,
then remove the 3 screws(M2*3.5mm), after that
remove the heatsink
Attention：the screw driver torque is 1.5-2.0Kgf-cm
Component P/N Qty
Screw E43-1203501-H29 3
Heatsink E31-0801210-TA9 1
9.8：Remove 2 screws (M2*3.5mm)
Attention: the screw driver torque is 1.5-2.0Kgf-cm
Component P/N Qty
Screw E43-1203501-H29 2
9.9：Remove 2 screws (M2*3.5mm)
Attention: the screw driver torque is 1.5-2.0Kgf-cm
Component P/N Qty
Screw E43-1203501-H29 2
2
1
2
1
2
3
1