X340(MS-1352)Disassemble Guide
11、 LCD MODULE ASSY
11.10:Remove the 2 hook sponge on two side of
hooks of panel; then remove the hooks as pic
shows;
Component P/N Qty
Hook Sponge E2Y-3511411-Y42 2
11.11:Raise the display module from right side,
then remove the module;
Attention: don’t remove the display module directly,
and the LCD cable is connected with the back side
of Module;
11.12:Remove the black tape that stabilize the
LVDS cable, then remove the LVDC cable from
display module;
Component P/N Qty
LVDS Cable K19-3023002-V03 1