MSI X340 - Separate Upper and Lower Case; Remove Upper Case Screws; Pry Open Right Side of Upper Case; Pry Open Left Side of Upper Case

X340（MS-1352）Disassemble Guide
4、SEPARATE UPPER CASE AND LOWER CASE
4.1：Remove the 6 screws(M2*3.5mm);
Attention: the screw driver torque is: 1.5-2.0Kgf-cm
Component P/N Qty
Screw E43-1203501-H29 6
4.2：When remove the Upper case, firstly remove
the right side. Lift the inside of the upper with the
thumb; the other fingers push the upper to left.
4.3：Then remove the left side. Lift the inside of the
upper with the thumb; the other fingers push the
upper to right.