36
Overview of Components
EZ Debug LED
These LEDs indicate the debug status of the motherboard.
CPU - indicates CPU is not detected or fail.
DRAM - indicates DRAM is not detected or fail.
VGA - indicates GPU is not detected or fail.
BOOT - indicates the booting device is not detected
or fail.
Important
y
The JRGB1 connector supports 5050 RGB LED strip (12V/G/R/B) with the maximum
power rating of 3A (12V).
y
Please keeping the LED strip shorter than 2 meters to prevent dimming.
y
Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing the LED strip.
y
Please use MSI’s software to control the extended LED strip.
JRGB1: RGB LED connector
The JRGB1 connector allows you to connect the 5050 RGB LED strips 12V.
1
JRGB1
Extension cable
5050 RGB LED strips 12V
1
JRGB1
1 +12V 2
G
3 R 4
B
To Next Page
Loading...
