Do you have a question about the MSI Z390-S01 and is the answer not in the manual?
Brand | MSI |
---|---|
Model | Z390-S01 |
Category | Motherboard |
Language | English |
Specifies the supported CPU types and socket information.
Details the motherboard's chipset and its capabilities.
Lists memory slot types, supported capacity, and DDR4 specifications.
Describes the PCIe and M.2 expansion slot configurations.
Provides details on the integrated graphics ports and resolutions.
Mentions support for multi-GPU technologies like AMD CrossFire.
Details SATA and M.2 storage interface specifications.
Explains the LED indicators for the LAN port status and speed.
Shows the audio port configurations for different channel outputs.
Identifies the location of the CPU socket on the motherboard diagram.
Locates the DIMM slots for RAM installation on the motherboard diagram.
Shows the positions of the PCIe expansion slots on the motherboard diagram.
Identifies the M.2 slots for SSD installation on the motherboard diagram.
Locates the front panel connectors for power and audio on the diagram.
Shows the location of the SATA connectors for storage devices on the diagram.
Identifies the main power connectors for the motherboard on the diagram.
Locates the front panel audio connector on the diagram.
Shows the locations of the internal USB 2.0 headers on the diagram.
Identifies the internal USB 3.1 Gen1 headers on the diagram.
Locates the connector for a TPM module on the diagram.
Shows the location of the Thunderbolt add-on card connector on the diagram.
Identifies the RGB LED header for lighting on the diagram.
Locates all fan and pump connectors on the motherboard diagram.
Identifies the location of the EZ Debug LEDs for diagnostics on the diagram.
Locates the chassis intrusion connector on the diagram.
Shows the location of the CMOS clear jumper on the diagram.
Provides crucial installation and handling tips for the CPU socket and CPU.
Recommends the order for installing multiple memory modules for optimal performance.
Notes on DIMM installation order and OS memory limitations for optimal setup.
Advises on supporting heavy graphics cards and safe installation practices for PCIe slots.
Notes on Intel RST support and Optane Memory compatibility for M.2 slots.
Details the SATA connectors for storage devices and their usage.
Provides tips on handling SATA cables to prevent data loss and ensure proper connection.
Emphasizes the importance of secure power cable connections for motherboard stability.
Details the pin assignments for the front panel audio connector.
Notes on correct VCC/Ground connection and device charging for USB 2.0.
Advises on correct power and ground pin connections to prevent damage for USB 3.1 Gen1.
Provides important notes on RGB LED strip compatibility, length, and installation.
Describes the EZ Debug LEDs and what they indicate for troubleshooting motherboard status.
Instructions for resetting the chassis intrusion warning message.
Provides step-by-step instructions for clearing CMOS and resetting BIOS.
Notes on BIOS updates, descriptions, and picture variations for reference.
Explains the methods to access the BIOS setup menu.
Lists the function keys and their corresponding actions within the BIOS.
Crucial safety reminder before clearing CMOS data.
Step-by-step guide for updating BIOS using the M-FLASH utility.
Instructions for updating BIOS via the MSI Dragon Center software.
Step-by-step instructions for installing Windows 10 on the system.
Guide on how to install essential motherboard drivers from the provided disc.
Instructions for installing bundled software utilities after drivers are installed.
Federal Communications Commission statement regarding device compliance.
European conformity statements for product standards.
Compliance statement for Australian electrical equipment standards.
Guidelines for battery disposal and safety in different regions.
Information on chemical substances in compliance with REACH regulations.
Directs users to the MSI website for technical guides, BIOS, and drivers.
Information on how to register the product for support and warranty.