MSI Z490 -S01

24


Please download and update the latest utilities and drivers at www.msi.com



 Power on the computer.
 Insert the Windows
®
10 installation disc/USB into your computer.
 Press the  button on the computer case.
 Press F11 key during the computer POST (Power-On Self Test) to get into Boot
Menu.
 Select the Windows
®
10 installation disc/USB from the Boot Menu.
 Press any key when screen shows 
message.
 Follow the instructions on the screen to install Windows
®
10.

 Start up your computer in Windows
®
10.
 Insert MSI
®
Driver Disc into your optical drive.
 Click the pop-up notification,
then select  to open the installer. If you turn off the AutoPlay
feature from the Windows Control Panel, you can still manually execute the
 from the root path of the MSI Driver Disc.
 The installer will find and list all necessary drivers in the  tab.
 Click the button in the lower-right corner of the window.
 The drivers installation will then be in progress, after it has finished it will prompt
you to restart.
 Click  button to finish.
 Restart your computer.

Before you install utilities, you must complete drivers installation.
 Open the installer as described above.
 Click the  tab.
 Select the utilities you want to install.
 Click the button in the lower-right corner of the window.
 The utilities installation will then be in progress, after it has finished it will
prompt you to restart.
 Click  button to finish.
 Restart your computer.