Need help?Do you have a question about the MSI Z590 and is the answer not in the manual?
General| Chipset | Intel Z590 |
|---|---|
| CPU Socket | LGA 1200 |
| Memory Type | DDR4 |
| Form Factor | ATX |
| Maximum Memory | 128 GB |
| Memory Slots | 4 |
| SATA Ports | 6 |
| M.2 Slots | 3 |
| PCIe Version | PCIe 4.0/3.0 |
| LAN | Intel I225-V 2.5Gbps |
| Wi-Fi | Intel Wi-Fi 6E AX210 |
| PCIe Slots | 3 x PCIe x16 |
Enter BIOS utility to configure RAID settings.
Change SATA mode to RAID/Optane and enable M.2 remapping.
Apply BIOS modifications and restart the system.
Navigate to the Intel Rapid Storage Technology section in BIOS.
Initiate RAID volume creation in the Intel RST utility.
Set RAID name, level, and select disks for the volume.
Verify RAID volume details and confirm its creation.
Obtain the Intel Rapid Storage Technology driver from MSI support.
Transfer downloaded RST driver files to a USB storage device.
Load RST driver when prompted during Windows installation.
Browse and select the RST driver folder on the USB drive.
Proceed with Windows OS installation on the detected RAID volume.
Confirm RAID volume recognition in Windows Device Manager.
M.2 slot usage and Intel SSD compatibility for RAID on Z590.
To Next Page