MSI Z77A-G45 Thunderbolt series - Page 55

2-9
MS-7752
Chapter 2
Seral (COM) Port0 Settngs
Select an address and correspondng nterrupt for the seral port.
Hardware Montor
Press <Enter> to enter the sub-menu.
CPU Smart Fan Target
Controls CPU fan speed automatcally dependng on the current temperature and
to keep t wth a spec󰘰c range. If the current CPU temperature reaches the target
value, the smart fan functon wll be actvated.
SYS Fan1/ 2 Control
These tems allow users to select how percentage of speed for the SYSFAN1/ 2.
CPU/ System Temperature, CPU FAN/ SYS FAN 1/ 2 Speed
These tems show the current status of all of the montored hardware devces/ com
-
ponents such as CPU temperature/ system temperature and all fans’ speeds.
Intel(R) Smart Connect Con󰘰guraton
Press <Enter> to enter the sub-menu.
Intel(R) Smart Connect Technology
Ths feature can update applcatons (ex. emal and socal networks) by perodcally
wakng your system from sleep mode. And you do not have to wat for the applcatons
to update when you wake up the system. Ths tem s used to enable/ dsable the
Intel smart connect technology.
Power Management Setup
Press <Enter> to enter the sub-menu.
EuP 2013
Energy Usng Products Lot 6 2013 (EUP) reduces power consumpton when system
s o󰘯 or n standby mode.
Note: When enabled, the system wll not support RTC wake up event functons.
Restore after AC Power Loss
Ths tem spec󰘰es whether your system wll reboot after a power falure or nterrupt
occurs. Settngs are:
[Power O󰘯] Always leaves the computer n the power o󰘯 state.
[Power On] Always leaves the computer n the power on state.
[Last State] Restore the system to the status before power falure or nterrupt
occurred.
Wake Up Event Setup
Press <Enter> to enter the sub-menu.
Wake Up Event By
Settng to [BIOS] actvates the followng 󰘰elds, and use the followng 󰘰elds to set the
wake up events. Settng to [OS], the wake up events wll be de󰘰ned by OS.
Resume By RTC Alarm
The 󰘰eld s used to enable or dsable the feature of bootng up the system on a
scheduled tme/date.
Date/ HH:MM:SS
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶