Need help?Do you have a question about the MSI Z87-G45 GAMING and is the answer not in the manual?
General| Chipset | Intel Z87 |
|---|---|
| Form Factor | ATX |
| CPU Socket | LGA 1150 |
| Memory Slots | 4 |
| Memory Type | DDR3 |
| Maximum Memory | 32 GB |
| PCIe x1 Slots | 3 |
| SATA Ports | 6 x SATA 6Gb/s |
| Audio | Realtek ALC1150 |
| LAN | Killer E2205 |
| RAID Support | RAID 0, 1, 5, 10 |
| Memory Speed | 1600/1333/1066 MHz |
| USB 3.0 Ports | 6 |
| USB 2.0 Ports | 8 (4 rear, 4 via header) |
| Multi-GPU Support | NVIDIA SLI, AMD CrossFireX |
| PCIe x16 Slots | 2 x PCIe 3.0 x16 slots 1 x PCIe 2.0 x16 slot (runs at x4) |
Lists all trademarks mentioned in the manual and their owners.
Details the revision history of the manual, including version and date.
Provides information on how to get help and support for the motherboard.
Declaration of compliance with European Union directives for safety and relevant provisions.
Provides information on chemical substances in compliance with regulations like EU REACH.
Details supported CPU generations and socket type for the motherboard.
Specifies the Intel chipset used on the motherboard.
Information on supported DDR3 memory types, capacity, and architecture.
Lists the available PCIe slots and their specifications.
Details the resolutions and ports for integrated graphics.
Information on AMD CrossFire and NVIDIA SLI support.
Specifies supported storage interfaces, speeds, and RAID levels.
Details the types and number of USB ports available.
Specifies the audio codec and features like S/PDIF output.
Details the Ethernet controller and its features.
Explains the PS/2 port for keyboard and mouse connection.
Describes the function of the Clear CMOS button for resetting BIOS settings.
Details the coaxial S/PDIF output for digital audio transmission.
Details the optical S/PDIF output for digital audio transmission.
Describes the VGA port for monitor connection.
Details the DVI-D port for connecting digital displays.
Explains the HDMI port for digital audio-video transmission.
Explains the physical features of the LGA 1150 CPU for proper alignment.
Explains the population rules for enabling Dual-Channel memory mode.
Details how to connect the ATX power supply to the motherboard's power connectors.
Step-by-step instructions for installing a single video card into an expansion slot.
Identifies specific voltage check spots for measuring CPU and PCH voltages.
Explains how to use the JBAT1 jumper to clear the CMOS RAM.
Guide to using the Total Installer utility for installing drivers and software.
Instructions for connecting the JFP1 system panel connectors.
Guide to connecting the front panel audio connector.
Details on installing USB 2.0 connectors.
Details on installing USB 3.0 connectors.
Steps on how to access the system's BIOS setup utility.
Displays the current temperatures of the processor and motherboard.
Allows selection of the BIOS setup language.
Shows details like CPU name, frequency, DRAM capacity, and BIOS version.
Lists the main BIOS menus: SETTINGS, OC, M-FLASH, OC PROFILE, HARDWARE MONITOR, BOARD EXPLORER.
Allows setting system date and time, and displays SATA port information.
Shows detailed system information, including CPU type, BIOS version, and Memory.
Configures PCI express interface protocol and latency timer.
Sets onboard power LED behaviors and integrated peripherals.
Configures integrated peripherals like LAN, HDD, USB, and audio.
Enables or disables the onboard LAN controller.
Enables or disables the legacy network Boot Option ROM.
Configures UEFI network stack for IPv4/IPv6 function.
Enables or disables IPv4 PXE boot support.
Enables or disables IPv6 PXE boot support.
Configures Virtu technology for graphics performance enhancement or power saving.
Selects the primary boot device for graphics output.
Allocates system memory to the onboard graphics.
Dynamically allocates system memory for graphics-intensive applications.
Enables or disables S3 RTC wake up with Intel Rapid Start Technology.
Sets a timer for the system to enter sleep mode with Intel Rapid Start Technology.
Supports Active Page Threshold when Rapid Start partition size is less than DRAM.
Sets Rapid Start partition size for Active Page Threshold.
Enables or disables Intel Rapid Start Technology for hybrid hard disk drive.
Sets an administrator password for system security.
Sets a user password for system security with limited rights.
Enables or disables U-Key as user's password to access the system.
Sets the TPM (Trusted Platform Module) function.
Configures chassis intrusion detection and warning messages.
Exits BIOS setup without saving any changes.
Saves current changes and reboots the system.
Saves the current changes made in BIOS.
Discards all current changes and restores previous values.
Restores all default values set by the BIOS vendor.
Allows selecting a boot device to start the system.
Shows the current frequencies of installed CPU, Memory, and Ring.
Sets the CPU Base Clock, allowing for overclocking.
Shows the current CPU Base Clock strap value.
Adjusts the CPU Base Clock Strap for potential overclocking.
Enables or disables booting from a USB flash disk with a BIOS file.
Selects a BIOS file from a USB disk to boot the system.
Saves the current BIOS file to a USB flash disk.
Selects a BIOS file from a USB disk to update the BIOS.
Selects a BIOS file including ME settings to update BIOS and ME.
Manages overclocking profiles for saving and loading settings.
Names the current overclocking profile.
Saves the current overclocking profile to memory.
Loads a saved overclocking profile.
Clears the current overclocking profile.
Saves OC profiles to a USB flash disk.
Loads OC profiles from a USB flash disk.
Shows current CPU temperature, system temperature, and fan speeds.
Displays minimum, maximum, and current temperature/speed graphs.
Allows setting fan speeds and target temperatures using Smart Fan Control.
Describes the functions of the Realtek HD Audio Manager panel.
Procedure for configuring, deleting, and resetting RAID volumes using the Intel RAID Option ROM.
To Next Page
