To Next PageTo Next PageWhy is my MSR XGK EXPEDITION Stove leaking fuel?
If your MSR Stove is leaking fuel, it could be due to several reasons. A damaged or missing pump seal, fuel tube O-ring, or control valve O-ring could be the cause. Consider replacing the pump seal, fuel tube O-ring, or control valve O-ring, respectively. Another potential issue is an obstructed check valve, in that case you should clean the check valve cavity.
What to do if my MSR Stove has poor performance?
If your MSR Stove is showing poor performance, several factors could be at play. You might need to repeat preheating the stove. Ensure the pump cup is lubricated. Increase pressure by pumping the plunger. A clogged jet or fuel line could also be the culprit; clear the jet and clean the fuel line to resolve this.
General| Boil Time (Diesel), 1 liter | 4.5 minutes |
|---|---|
| Simmering Capability | Yes |
| Ignition | Manual |
| Wind Protection | Yes |
| Fuel bottle | Not included |
| Burner Output | 11, 000 BTU/h |
| Shaker Jet | Yes |
| Pump Type | Manual |
| Heat Exchanger Compatible | No |
| Type | Liquid Fuel |
| Fuel Type | White Gas, Kerosene, Diesel |
| Boil Time (White Gas), 1 liter | 3.5 minutes |
| Burn time (Kerosene) per 20 oz. / 600 ml of fuel | 120 minutes |
| Material | Stainless steel, Brass |
Step-by-step guide on how to safely fill the fuel bottle with fuel.
Instructions for correctly putting the stove components together.
Detailed procedure for safely igniting and operating the stove.
Procedures for cleaning specific parts like the jet and cable.
Crucial safety instructions and warnings before using the stove.
Details on compatible fuels and operational recommendations.
Information regarding the product's warranty coverage and terms.
Details for reaching MSR customer service for support.
Step-by-step guide to securely insert the pump into the fuel bottle.
Instructions to connect the stove assembly to the fuel pump.
Procedure to prime the stove for optimal and safe operation.
How to ignite and operate the stove safely after preheating.
General guidance on keeping the stove in good working condition.
Detailed steps for thorough cleaning of jet and fuel line components.
Procedures for maintaining the fuel pump and its parts.
Solutions for problems like leaking fuel or poor stove performance.
