Why is my MSW CRF50-50W Automobile Accessories compressor running continuously?
Your MSW Automobile Accessories compressor might be running continuously due to improper air circulation around the unit or a high ambient temperature. To resolve this, improve ventilation around the unit.
What to do if MSW CRF50-50W compressor runs long but doesn't chill properly?
If the compressor in your MSW Automobile Accessories has been running for a long time but is not chilling properly, the issue might be due to improper air circulation around the unit, a fan not working properly, or the drawer (door) not being closed correctly. Here's what you can do: * Improve air circulation/ventilation around the unit. * Check the condition of the fan. * Check the drawer closure and its seal.
What to do if MSW CRF50-50W Automobile Accessories compressor operates, but the refrigerator does not chill?
If your MSW Automobile Accessories compressor is running, but the refrigerator isn't chilling, it could be due to refrigerant leakage through the evaporator. Check the unit for leaks and refill the refrigerant.
How to troubleshoot MSW CRF50-50W Automobile Accessories when the device does not operate?
If your MSW Automobile Accessories device isn't operating and the compressor isn't starting, here are a few things to check: 1. No power or incorrect power connection: Check the input voltage, battery, and power connection. 2. Blown fuse: Replace the blown fuse of the refrigerator with an operational one. The fuse socket is located on the red wire of the power supply connection.
General| Brand | MSW |
|---|---|
| Model | CRF50-50W |
| Category | Automobile Accessories |
| Language | English |
Explains various symbols used in the manual for safety and product information.
Guidelines for safe electrical operation and connection of the device.
Ensures a safe working environment when using the device.
Precautions for user safety during operation and handling.
General rules for operating the device safely and correctly.
Overview of the device's design and intended applications.
Steps and considerations before starting to use the device.
Diagram illustrating the electrical connections of the device.
Details on using the control panel for device operation and settings.
Configuration options including voltage protection, performance, and temperature scales.
Information on the tilt sensor function and behavior during power interruptions.
List and explanation of error codes displayed by the device.
Common issues, their causes, and recommended solutions.
Instructions for cleaning the device using appropriate agents and methods.
Details on maintenance, refrigerant circuit, and long-term storage.
Guidelines for environmentally responsible disposal of the product.
Manufacturer's contact details and website for further assistance.
To Next Page
