Need help?Do you have a question about the MSW MSW-FI-11000 and is the answer not in the manual?
Instructions and precautions to follow before installing the frequency converter.
Guidelines for safe installation procedures of the frequency converter.
Procedures for correctly connecting cables to the frequency converter.
Safety precautions after connecting the frequency converter to the power supply.
Important safety considerations and rules for operating the frequency converter.
Safety steps to take before performing any maintenance on the device.
Checking motor insulation to prevent damage to the inverter when first using or restarting.
Adjusting motor protection or using a thermal relay if motor power exceeds converter rating.
Consider mechanical device tolerance when operating above 50 Hz.
Using frequency hopping parameter to avoid mechanical resonance.
Understanding increased motor heat, noise, and vibration due to PWM wave.
Avoiding temporary overcurrent or damage when using capacitors on the output side.
Proper use of contactors for input/output terminals to prevent damage.
Do not exceed the rated voltage range to prevent equipment damage.
Do not convert three-phase input to two-phase, as it may damage the equipment.
To Next Page
General