Need help?Do you have a question about the MSW MSW-FI-750 and is the answer not in the manual?
Details on preparing the device for installation and ensuring safe setup procedures.
Guidelines for safe installation practices, including placement and connections.
Instructions for correctly and safely connecting power and output cables to the device.
Checks and precautions before connecting the device to the main power supply.
Safety measures and checks after the device has been connected to the mains.
Safe operating procedures and precautions to follow while the device is running.
Procedures and safety checks to perform before undertaking maintenance on the device.
Checking motor insulation before initial use or restart after long periods to prevent inverter damage.
Ensuring motor protection is adequate, adjusting parameters or using thermal relays.
Considerations for operating the device above 50 Hz, focusing on mechanical tolerances.
Addressing mechanical resonance points by setting frequency hopping parameters.
Notes on increased motor temperature, noise, and vibration due to PWM output.
Warning about potential overcurrent or damage from output-side components like capacitors.
Guidelines for using contactors with input/output terminals to avoid damage and ensure longevity.
Prohibition of operating the frequency converter outside its specified voltage range.
Warning against converting a three-phase frequency converter to two-phase operation.
To Next Page
General