[NEXTOR]
You can find detailed information, latest versions and
tools at: http://www.konamiman.com/msx/msx-
e.html#nextor
[Boot keys]
The boot time configuration of Nextor can be modified
by keeping pressed some special keys while the system
is booting.
These keys and their behavior are:
1: Force boot in MSX-DOS 1 mode (TR: Z80 mode).
2: Force boot in MSX-DOS 1 mode (TR: R800 mode).
3: Force boot to the BASIC prompt.
4: (Turbo R only) Boot in R800-ROM mode, assign the
largest mapper found as the primary mapper and free
the 64K allocated for the R800-DRAM mode.
CTRL: Assign only one drive to each Nextor kernel
with a device-based driver.
SHIFT: Prevent MSX-DOS kernels from booting. This
isuseful to disable the internal floppy disk drive.
R: Disable Nextor when the cartridge is in slot 1.
F: Disable Nextor when the cartridge is in slot 2.
To Next Page
Loading...