2
INDEX
Foreword..................................................................2
Safety Precautions...................................................3
A. General............................................................3
B. Related to Fuel ................................................3
C. When Mowing..................................................3
Safety Decals........................................................ 4-5
Specifications...........................................................6
Operating Instructions........................................... 6-8
A. Controls ...........................................................6
1.Ignition Switch ................................................6
2.Fuel Shutoff Valve..........................................6
3.Engine Throttle...............................................6
4.Recoil Starter..................................................6
5.Transmission Shift Lever................................6
6.Blade Clutch................................................ 6-7
7.Steering/Brake Lever......................................7
8.Neutral Latch Levers ......................................7
9.Operator Presence Levers .............................7
B.Initial Adjustments ............................................7
C.Break-ln and Operation ................................. 7-8
Cutting Height Adjustment Table ............................ 9
Maintenance........................................................9-13
A.General Maintenance ...................................... 9
B.Daily Maintenance After Mowing ..................... 9
C.Maintenance Every 40 Hours .......................... 9
D.Lubrication Chart ............................................. 10
E.Engine Maintenance ........................................ 10
F.Mower Maintenance......................................... 10
1.To Change a Blade ........................................ 10
2.To Sharpen a Blade ....................................... 10
3.To Change the Blade Drive Belts................... 10
4.To Change the Transmission Drive Belt......... 11
5.To Change Either Traction Drive Belt............. 11
6.To Change a Spindle Assembly.....................12
7.To Change Spindle Bearings .........................12
Replacement Parts - Spindle..................................13
Suggested Replacement Parts - Mower.................13
Suggested Replacement Parts - Engine ................13
Maintenance Record...........................................14-15
Warranty.................................................................BC
FOREWORD
The MTD Pro Commercial, Walk-Behind, Rotary Mowers have been developed for
use by professional landscapers, commercial lawn service companies, professional turf
managers and golf course superintendents. The machines incorporate many safety
features that should be studied by all operators and maintenance personnel before use.
The list of safety precautions should receive particular attention. This manual presents
the operating and maintenance instructions necessary to keep your MTD Pro mower at
peak efficiency. If properly operated and maintained, your MTD Pro mower will give
dependable and trouble-free service.
Although hazard control and accident prevention partially are dependent upon the
design and configuration of the equipment, these factors are also dependent upon the
awareness, concern, prudence, and proper training of the personnel involved in the
operation, transport, maintenance and storage of the equipment.
CAUTION
: THE MTD Pro Commercial, Walk-Behind, Rotary Mowers should
only be operated and maintained by thoroughly trained individuals. The
machines could cause serious injury to anyone who misuses them or does
not understand their operation. All operators and maintenance personnel are
urged to read this entire manual for their personal safety.
WARNING:
The Engine Exhaust from this product contains chemicals known to the
State of California to cause cancer, birth defects or other reproductive harm.
To Next Page
Loading...
